PC cases must be compatible with the motherboard of your PC. There are ATX, Micro ATX, and Mini ITX PC cases. ATX is the larger motherboard and requires a more significant PC case. PC cases are not universal. It is sure to buy a PC case according to the motherboard compatibility.
Mid Tower PC case is the best option for a standard ATX PC case. It can also be fitted into a Full Tower PC case with several fans to cool down the components. PC cases are just for the better look of your PC. They do not have any impact on the performance of the PC.
Commonly, PC cases have much space for better airflow, so they are so big. You can install multiple GPUs and hard drives to get the best workflow. Consider buying white pc cases with good airflow, and you will be pretty satisfied with that. These significant PC cases need 3 to 5 fans to be installed inside and lower the temperature.
PC Case Form Factors
When you see the PC’s form factor, you will find that Full Tower PC cases are the largest ones. Then there are Mid Tower PC cases and Mini Tower PC cases. Small Form-factor and HTPC are the minor PC cases. You can choose a PC case according to the compatibility of the motherboard.
Significant PC cases support the best airflow because of having much space for fans and water cooling radiators.
Are Computer Cases Universal?
Computer cases are not universal, but you can accommodate complete Tower and Mid Tower PC cases with extra components if the motherboard is compatible.
PC Case Dimensions cm:
The height of the Full Tower PC case is 20 inches. They are deep inside to place the maximum number of components. You can have 3 to 4 Graphics cards and more fans. It supports a 5.25-inch drive.
Mid Tower PC cases are usually 18 inches high and 8 inches wide. They have suitable space to set CPU cooler, two Graphics cards, and some storage.
The small form factor has space to fit the components only. You cannot use a liquid cooling system. You cannot place full-length graphics cards.
PC Case Compatibility:
To get the best compatibility of the PC case, you need to figure out what components you want inside the PC case. The only time you should pick the rest of your rig around your case is when you are going for a niche build such as an ultra-compact PC.
Many of your components are plugged into the motherboard, so let’s ensure that the motherboard will properly fit into your chassis. Motherboard follows a size convention; the standard size which is most widely used ATX. However, there are more giant boards such as EATX (Extended ATX) and smaller boards such as micro ATX, and the tiny one is Mini ITX.
You have to check the size of the motherboard and then make sure your case supports that. Then check for GPU. The main concern is its length and thickness.
If the length of the card is lower than the maximum support by the case, then it is ok. After that, check how many slots of GPU takes up. If your case has enough slots, then you are clear about using the case.
Your CPU does not matter for case compatibility, but the CPU cooler does. If your air cooler is fitted inside the height of the case, then it is the best. The PC case must have the space to mount the radiator. Whatever the PC case you buy, you can get that information on their website first. You must see the reviews for more information.
You must keep in mind the mounting spaces for storage. Mechanical hardware uses 3.5″ bays, SSD’s use 2.5″ bays, while CDs, DVDs, and Blu-rays use 5.25″ bays. Make sure to have enough space to fit all of your drives inside the PC case, and it should be set.
Lastly, consider your Power Supply Unit. This is not a significant concern, but some small cases do not support standard-size ATX power supplies. In these cases, you need to get a smaller SFX PSU.
Go through all these steps and confidently use everything. Now all you have to take into your consideration are aesthetics.