All public toilets and bathrooms require bathroom stalls or shower screens to provide the necessary privacy. Its function is to ensure that all urinals and toilets in public places have private spaces.
Even if they are not real toilets, they do not provide sound insulation or odor, but you will be visually protected from the rest of the room behind the closed door. U.S. builders build bathroom stalls according to a specific size and ease-of-use standards.
Depending on the number of people visiting the public area and the space provided for the bathroom, they must meet the proper size of the bathroom stall dimensions. However, these standards vary from state to state, so it is always wise to compare local regulations with state officials.
Bathroom stall dimensions:
In addition, you should also include the size of the urinal. As we have already mentioned, according to existing building codes and laws, both models must exist in public toilets. The dimensions to consider before starting the installation are:
- Stall depth
- Stall width
- Door size
- Armrest size
- Stall and door height
We’ll list the minimum size bathroom stall dimensions. However, if you have enough space, you can always make a more spacious booth.
ADA Bathroom Stall Dimensions
- The ADA Bathroom Stall must be at least 60 inches (1.5m) wide. They need free space to maneuver the wheelchair and correct positioning. If there is a wall-mounted toilet, it must be 56 inches (1.4 m) deep.
- On the other hand, a classic floor-standing toilet should be at least 59 inches (1.5 m) deep. The width of the door should be 34 to 36 inches (86 to 91.5 cm) to ensure unobstructed passage. The dividing wall or dividing wall is usually 1.5 m (58 inches) high and has no pilasters.
- Both doors and partitions should be 12 inches (30.5 cm) above the ground. 12 inches (30.5 cm) of clearance will make cleaning and disinfecting more convenient. Coat racks in ADA bathrooms must be at least 36 inches (91.5 cm) long and no more than 6 inches (15 cm) from the back corner.
- The position facing the handrail should be no more than 12 inches (30.5 cm) from the rear wall. Also, the average height of the handrail should be 33 to 36 inches (84 to 94.5 cm) above the ground. This will keep them away from the floor tiles.
- Also, pay attention to arrange the steel bar radius size and sufficient materials according to the regulations. Remember that the space available in the ADA bathroom stall is critical, so you must follow the required door size. Only in this way can the wheelchair be operated without obstacles.
Standard Toilet stall dimensions:
When it comes to standard Toilet stall dimensions, there are several key factors to consider. For standard Toilet stall dimensions, the width must be at least 36 inches (91.5 cm). Remember that the interior part must be free to use the space without obstacles.
Since there is no regulation on the maximum width, you can install it according to the available space you have. Carefully position the toilet at least 15 inches (38.1 cm) from the compartment wall from the left and right sides.
The depth of standard toilet stall dimensions should be at least 1.5 m (60 inches). In this way, it will provide enough space to enter and move freely. The height of the barn walls and partitions must be at least 58 inches (1.5 m).
In addition, you must place the door and partition at the desired height of 12 inches (30.5 cm) from the floor.
Urinal bathroom stall dimensions:
The urinal bathroom stall dimensions in the men’s toilet should include 30 x 48 inches (76 x 13 cm) of space for each urinal. The privacy panel can separate areas, but this is not required. A urinal must be placed at least 60 inches (1.5 m) in height and a standard height of 12 inches (30.5 cm) from the floor.
As for urinals, they are a necessity and obligation in some states. The number of people required depends on the number of people in the state and the region. Therefore, before ordering and installing a urinal bathroom panel, you should check local laws and requirements.